This complete kit provides everything necessary to mount virtually any 1-inch or 30mm scope with professional results. Proper scope installation is critical to the accuracy of your firearm. Kit contains Alignment Rods, Lapping Bar with Handle, Lapping Compound, Level-Level-Level, Thread Locker, FAT wrench with bits, and hard storage case.

Wheeler Engineering FAT Wrench: A hand driven, click/clutch style torque wrench that is very useful for applying the necessary torque to most firearm and firearm accessory fasteners. The FAT Wrench features a thick ergonomic handle, a standard 1/4" drive tip, and can be used to apply torque from 10 to 65 in-lbs at 5 in-lb increments. Includes 9 bits and a square drive adapter. Includes a Leupold/Buehler windage bit, #10 flat blade, #11 flat blade, #32 flat blade, 3/32" Allen, 5/32" Allen, T10 Torx, T15 Torx, T20 Torx, and a Square drive adapter bit.

Scope Ring Alignment: Alignment and Lapping of rings ensure maximum surface area contact between scope tube and rings. This not only helps the rings hold the scope more securely during heavy recoil but also protects your scope from damage misalignment can cause. Misaligned rings cause stress on the scope tube, which can dent the tube, distort the reticle, and cause adjustment problems.  The combo kit comes with 2 alignment bars for 1" and 30mm, 2 lapping bars one 1" and one 30mm and a lapping rod handle, plus a 1 oz jar of 220 grit high quality silicon carbide lapping compound.  

Level-Level-Level: The Wheeler Engineering Level-Level-Level is the simplest, most accurate scope leveling system out there. Misaligned crosshairs rob you of accurate bullet placement, especially at long range, where it counts. Crooked crosshairs cause your scope adjustments to be unreliable and even make zeroing your firearm a frustrating and costly experience. The scope is leveled to your receiver, not to the top of a scope base.  They quickly and easily get the reticle perfectly aligned with your gun. Set includes two levels.